**Due to its packing, I will not test this model before shipping**
* LED Type: Cree XP-E Q5
* Function: Low-Med-High
* Finish: HA Type Ⅲ
* Reflector: Orange Reflector
* Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip
* Water and Dust Resistant to IP68
* Switch: Head Twisty Switch
* Mil-spec: MIL-STD-810F
* Battery: 1 x AAA, 1 x Rechargeable NiMh AAA, or 1 x 10440 (due to the small body size, 10440 batteries are not recommended since it may cause the light becoming hot very quickly).
Functions and Runtime * Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes)
* Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual
Size and Weight: L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') , 22.8g (Excluding Battery and belt), 50.8g (Excluding battery)
Operation: Battery installation: Remove the light tail. Insert the battery with the negative end toward the tail.
Operation: Insert the battery and tighten the tail Tighten the head clockwise to turn on the headlamp. When the light is on, loosen (counter-clockwise) and tighten (clockwise) the head within 1 second will change the mode from low, medium to high level. When choose a specific mode, the headlamp with memorize it and next time the headlamp will enter into that specific mode when turning on. Loosen the head to turn off the headlamp.
Warning: If you don't need to use the headlamp for quite a long time, it is suggested to loosen the tail as well, which will avoid the unexpected turning on.
